Key takeaways
- Monthly or account fees. A fixed monthly charge for the account, sometimes with a minimum that applies if your processing is low.
- Gateway or software fees. Charges for the checkout or API layer, either monthly or per transaction.
- PCI compliance fees. Some providers charge a recurring fee for PCI DSS validation support, and some charge a non-compliance fee if you do not complete the questionnaire. The standard itself is maintained by the PCI Security Standards Council.
- Chargeback fees. A fixed charge each time a dispute is filed, whether or not you win it.
- Refund handling. Ask whether the original percentage is returned when you refund a sale.
- Cross-border and currency fees. Extra network charges when the card or the currency is foreign.
- Early termination fees. Penalties for leaving a contract early, and any equipment lease terms.
- Setup or application fees. A one-time charge to open the account, which some providers waive.
Credit card processing fees are the total a business pays each time a customer pays by card, and they are built from three layers: interchange paid to the card issuer, network assessments paid to the card network, and a markup kept by your processor. Most quotes blend those three into a single percentage, which is why two statements that both say "2.9%" can hide very different arrangements.
This guide explains what each layer is, how the three common pricing models (flat rate, interchange plus and tiered) package them, why debit usually costs less than credit, and which other charges show up on a statement. It ends with a hypothetical $100 sale so you can see the arithmetic. Rates and rules are stated as of November 2026, and the sources are linked so you can check them.
If you already have a statement in hand, pair this with how to read a processing statement and the effective rate calculator.
The three layers behind credit card processing fees
Whether your provider calls it cc processing fees, payment processing fees or a merchant discount, the money splits into the same three parts. Knowing which part you are looking at is most of the work of reading a quote.
1. Interchange
Interchange is the fee set for each transaction type and paid to the bank that issued the customer's card. Visa describes it as a transfer between financial institutions, and says merchants do not pay it directly. Instead you pay a combined merchant discount to your processor, and interchange is one of the costs inside it.
Interchange is published by the networks as a rate table. Each line is a percentage plus a fixed amount per transaction, and the line your sale lands on depends on the card type (consumer credit, business credit, debit), whether the card was present, the merchant category, and how the transaction was submitted. In Visa's table effective April 18, 2026, consumer credit and business credit lines run up to 3.15% + $0.10 and 3.15% + $0.20 for the non-qualified categories, while a regulated debit card is 0.05% + $0.21 (see the Visa USA interchange reimbursement fee schedule).
2. Network assessments
Card networks such as Visa, Mastercard, American Express and Discover charge their own fees for running the network. These assessments and per-transaction network fees are usually a small percentage of the sale plus a few cents. They are the same for every merchant on the same network, and they are the layer people forget, because they are small and often passed through without a label.
3. Processor markup
The processor (or the payment facilitator or ISO that sells you the account) adds its own charge for authorization, settlement, support, software and risk. This layer is the one that is negotiable, and it is the one that differs most from provider to provider. It may be a percentage, a fixed amount per transaction, or both.
| Layer | Who receives it | Who sets it | Negotiable? |
|---|---|---|---|
| Interchange | The card issuer | The card network (published schedule), with Regulation II setting a ceiling on large-bank debit | No |
| Network assessments | The card network | The card network | Rarely |
| Processor markup | Your processor | Your processor, per contract | Yes |
Three pricing models: flat rate, interchange plus and tiered
The pricing model decides how those three layers are presented to you. The underlying costs are the same. The difference is how much of the breakdown you see.
Flat rate
One percentage plus a fixed amount per card transaction, such as 2.9% + 30 cents, regardless of card type. It is simple to forecast and easy to compare, and the processor absorbs the variation between a low-cost debit card and a high-cost premium rewards card. The trade-off is that you cannot see the layers, and a business that mostly takes lower-cost cards pays the same as one that takes premium cards.
Interchange plus (IC+)
The interchange for each transaction is passed through at cost, and the processor adds a stated markup on top. Because the interchange line item changes with each card, the statement shows what each layer cost, which makes it the model most often used for larger or more detailed accounts. The markup is typically quoted per business, so ask for it in writing and ask whether network assessments are included in it or listed separately.
Tiered
The processor sorts transactions into buckets, often called qualified, mid-qualified and non-qualified, and assigns each bucket a rate. The processor decides which transaction goes in which bucket, and the criteria are not standardized, so the same sale can land in a pricier bucket for reasons that are hard to audit. If a quote uses tiers, ask exactly which card types and entry methods fall in each one.
| Model | What you see | Strength | Watch for |
|---|---|---|---|
| Flat rate | One rate, one fixed amount | Simple, predictable | You cannot see the layers |
| Interchange plus | Interchange at cost plus a stated markup | Transparent line items | Whether assessments are separate; monthly fees |
| Tiered | Qualified, mid-qualified, non-qualified rates | Easy headline rate | Processor decides the bucket |
Why debit card processing fees are usually lower
Debit card processing fees are often lower than credit because of a federal rule. Regulation II, which implements the Durbin Amendment, limits the interchange that issuers with $10 billion or more in assets can receive on debit transactions. Smaller issuers are exempt, so a debit card from a community bank or credit union can carry a higher interchange rate than one from a large bank.
The Federal Reserve's Regulation II page states the cap as $0.21 plus 0.05% of the transaction value, plus a $0.01 fraud-prevention adjustment for issuers that qualify, and it reported that covered debit transactions averaged $0.23 per transaction, or 0.47% of the transaction value, in 2024 (see the Federal Reserve's Regulation II interchange data). On Visa's April 2026 schedule, the regulated debit line is 0.05% + $0.21, while the exempt (small-issuer) online debit line for e-commerce basic is 1.65% + $0.15.
One thing to know as of November 2026: the rule is in litigation. The ABA Banking Journal reported on October 26, 2026 that the Eighth Circuit upheld a lower court decision finding that the Fed exceeded its authority in deciding which costs could be counted in the cap, that the Fed would have to rewrite the rule, and that a separate appeal in another federal appeals court is still pending. That report does not say whether the ruling has taken effect, so the Fed's published figure above may change. Check the Federal Reserve page for the figure in force when you read this, and see the ABA Banking Journal report for the ruling. This is background, not legal advice.
The practical point for a business owner: debit cost is not zero, it is a fixed amount that matters most on small tickets, and what you are charged also depends on your pricing model. On flat rate pricing you pay the same regardless of the card. On interchange plus, a regulated debit sale shows its low interchange line and you pay your markup on top.
Other fees to watch on a statement
Credit card merchant fees are not only the per-sale percentage. A quote or statement can also include lines like these, and they can matter as much as the rate on a low-volume account.
The questions to put to any provider are collected in questions to ask a payment processor.
A hypothetical $100 sale, three ways
Here is how the same sale looks under the three models. The numbers are illustrative round figures, not a quote from any provider, and your actual interchange depends on the card and the category.
Say a customer pays $100 online with a consumer credit card. Suppose interchange for that card works out to $1.80 and network assessments to $0.15. Those two lines are the same no matter which processor you use.
| Line | Flat rate (2.9% + $0.30) | Interchange plus (hypothetical $0.50 markup, not a Flux figure) | Tiered (assumes mid-qualified bucket) |
|---|---|---|---|
| Interchange | Not shown | $1.80 | Not shown |
| Assessments | Not shown | $0.15 | Not shown |
| Processor markup | Not shown | $0.50 | Not shown |
| Total charged | $3.20 | $2.45 | Set by the bucket rate |
Now change one thing: the customer pays with a regulated debit card instead. The interchange line drops to roughly $0.26 under the 0.05% + $0.21 schedule, so an interchange plus statement would total about $0.91 for that sale, while the flat rate total stays at $3.20. The result for any real business depends on its card mix, ticket size and the markup it is quoted, which is why the useful number is your effective rate: total fees divided by total card volume for the month.
The effective rate calculator at /tools/effective-rate-calculator/ does that division for you from a statement.
Credit card processing rates and what may change
Interchange tables change, usually in spring and fall, so a statement from last year may not match today's schedule. A separate, larger change is working its way through the courts: a revised settlement of merchant litigation against Visa and Mastercard received preliminary approval from the court, according to Visa's June 2026 statement. Visa describes it as including a temporary reduction in average credit interchange, caps on posted credit rates and more options for merchants to surcharge. The settlement remains subject to final approval, and the terms may change, so read Visa's statement on the settlement for the current status.
The planning takeaway is modest: do not build a budget on a headline rate that may move. Ask any provider whether a pass-through model will reflect schedule changes automatically.
How Flux fits
Flux Payments offers two card pricing plans. The Flat Rate plan is 2.9% plus 30 cents per card transaction. The Interchange Plus plan, written "IC+", passes interchange through at cost plus a markup that is quoted for each business, and higher-volume merchants can get custom interchange plus pricing. Details are on the pricing page.
Flux also lists no contracts and no cancellation penalties. Highly regulated industries may have a volume-based setup fee, which can be waived on volume, and accounts processing under $100,000 a year in card volume may be subject to a $20 monthly account fee. Card settlement is 1-2 business days. A person reviews every application, and Flux does not promise approval.
Flux is built for online payments through hosted checkout, payment links, invoices and a REST API. Businesses with counter sales keep their existing point of sale.
What to do with your own statement
A final practical step: take your most recent statement, compute the effective rate, and ask your provider to break it into interchange, assessments and markup. If they can, you are comparing the right numbers. If they cannot, that is information too.
Frequently asked questions
What are credit card processing fees?
They are the total a business pays when a customer pays by card, made of interchange to the issuing bank, network assessments to the card network, and the processor's markup.
How much do cc processing fees cost a small business?
It varies by card mix, ticket size and pricing model. Visa's April 2026 interchange alone runs from 0.05% + $0.21 on regulated debit to 3.15% + $0.20 on non-qualified business credit, before assessments and markup. Your effective rate, total fees divided by card volume, is the number to track.
Why are debit card processing fees lower than credit?
Regulation II caps the interchange large issuers can receive on debit, at $0.21 plus 0.05% plus a $0.01 fraud adjustment per the Federal Reserve. Small issuers are exempt, and the rule has been challenged in court, so check the Fed's page for the current figure.
What is the difference between interchange and credit card merchant fees?
Interchange is one cost inside the credit card merchant fees you pay. Merchants pay a combined merchant discount to the processor, and interchange, assessments and the processor's markup are all parts of it.
Is interchange plus better than flat rate?
Neither is better for everyone. Flat rate is simple and predictable. Interchange plus shows each layer, which helps larger or more detailed accounts. Compare your effective rate under each quote.
How do I find my effective rate?
Add every fee on your statement, including monthly and gateway fees, and divide by the total card volume for the month. The effective rate calculator on this site does the arithmetic.
Related reading
Reading a card processing quote?
Flux offers Flat Rate and IC+ card pricing, with the IC+ markup quoted for each business. A person reviews every application.
Get Started